2R-II & 2R-III Rear Loaders

Leach™ 2R-II & 2R-III

Meet the truck that more operators demand over any other rear loader in the industry. With its standard 3.5 yd3 hopper, 5.5”packer/carrier operating cylinders, and class-leading 22-second packing cycle, it’s no wonder the Leach™ 2R Series is labeled as the most efficient rear-load collection tool on the road today.


The Leach 2R Series

  •  
    A

    Features

    The Leach 2R-II & 2R-III

     
    2R Series Features
     
  •  
    B

    Specifications

    Leach 2R-III

     
     

    BODY DIMENSIONS

    Heavy Duty 2R-III™ Residential

    Heavy Duty 2R-III™ Commercial

    Single Axle
    20 yd³

    Tandem Axle

    Single Axle
    20 yd³

    Tandem Axle

    25 yd³

    29 yd³

    32 yd³

    25 yd³

    29 yd³

    32 yd³

    Body Overall Length 263"
    (6,678 mm)
    285"
    (7,236 mm)
    318"
    (8,075 mm)
    341"
    (8,659 mm)
    263"
    (6,678 mm)
    285"
    (7,236 mm)
    318"
    (8,075 mm)
    341"
    (8,659 mm)
    Cab to Axle Refer to Labrie chassis requirements Refer to Labrie chassis requirements
    After Frame Refer to Labrie chassis requirements Refer to Labrie chassis requirements
    Min. Requirement Refer to Labrie chassis requirements Refer to Labrie chassis requirements
    Height Above Chassis Frame (Body Roof) 91" (2,321 mm) 91" (2,321 mm)
    Height Above Chassis Frame (Body Rear Frame) 93" (2,369 mm) 93" (2,369 mm)
    Height Above Chassis Frame (Tailgate Raised) 160" (4,061 mm 160" (4,061 mm)
    Body - Outside Width 96" (2,440 mm) 96" (2,440 mm)
    Body - Inside Width 90" (2,294 mm) 90" (2,294 mm)
    Hopper Depth 16" (414 mm) 16" (414 mm)
    Tailgate - Outside Width 96,5" (2451 mm) 96,5" (2451 mm)
    Start of Clear CA to Body Front Refer to Labrie chassis requirements Refer to Labrie chassis requirements
    Top of Step Below Chassis Frame 25 - 27" (635 - 686 mm) 25 - 27" (635 - 686 mm)
    Hopper Bottom Below Chassis Frame 23" (583 mm) 23" (583 mm)
    Hopper Opening Width 80" (2,032 mm) 80" (2,032 mm)
    Hopper Opening Height 57" (1,460 mm) 57" (1,460 mm)
    Rear of Body to Rear of Tailgate, Closed 74" (1,882 mm) 74" (1,882 mm)
    Loading Sill Below Chassis Frame 5" (127 mm) 5" (127 mm)
    Hopper Capacity 3,5 yd³ (2,7 m³) 3,5 yd³ (2,7 m³)
         

    BODY SPECS

    Heavy Duty 2R-III™ Residential

    Heavy Duty 2R-III™ Commercial

    Body Walls 10 GA 80,000 psi 10 GA 80,000 psi
    Body Roof 10 GA 80,000 psi 10 GA 80,000 psi
    Flanged Floor Plates 1/4" (6.4 mm) 50,000 psi 1/4" (6.4 mm) 50,000 psi
    Floor Through 5/16" (7.9 mm) 50,000 psi 5/16" (7.9 mm) 50,000 psi
    Ejection Face Plate 3/16" (4.8 mm) 50,000 psi 3/16" (4.8 mm) 50,000 psi
    Body Roof Liner (Body Rear End) 10 GA 80,000 psi (STD on Demolition) 10 GA 80,000 psi (STD on Demolition)
    Body Sides Liners (Body Rear End) 10 GA 80,000 psi (STD on Demolition) 10 GA 80,000 psi (STD on Demolition)
    Body Ramp Liners (STD Commercial & Demolition) 1/4" (6.4 mm) 80,000 psi (Hardox 450, 175,000 psi optional) 1/4" (6.4 mm) 80,000 psi (Hardox 450, 175,000 psi optional)
           

    TAILGATE

    Heavy Duty 2R-III™ Residential

    Heavy Duty 2R-III™ Commercial

    Tailgate Upper Side Walls 1/4" (6.4 mm) 50,000 psi (Hardox 450, 175,000 psi optional) 1/4" (6.4 mm) 50,000 psi (Hardox 450, 175,000 psi optional)
    Tailgate Lower Side Walls 1/4" (6.4 mm) 50,000 psi (Hardox 450, 175,000 psi optional) 1/4" (6.4 mm) 50,000 psi (Hardox 450, 175,000 psi optional)
    Hopper Floor Plate 1/4" (6.4 mm) 100,000 psi (Hardox 450, 175,000 psi optional) 1/2" (12.7 mm) 100,000 psi (Hardox 450, 175,000 psi optional)
    Carrier Face Plate 3/16" (4.8 mm) 50,000 psi 3/16" (4.8 mm) 50,000 psi
    Packer Face Plate 1/4" (6.4 mm) 80,000 psi 1/4" (6.4 mm) 80,000 psi
           




  •  
    C

    A CLEANER WAY OF DOING BUSINESS

    CNG Ready since 2001

     
    With the high volatility of diesel prices, fuel choice has never been more important. At Labrie, we believe in greener, safer, smarter and more efficient waste collection vehicles. This is what we have been designing and building for the past 25 years. We deliver the highest-quality, factory–installed compressed natural gas (CNG) solutions that are fully tested at our on-site CNG station. Our manufacturing expertise in CNG is passed along to you with every vehicle. You benefit from a trusted source of expertise when it comes to converting to CNG.

     

     

    THE BENEFITS OF CHOOSING CNG ARE HUGE:

    • AFFORDABLE : Substantially reduced fuel costs when compared to diesel
    • CLEAN: 23% less Greenhouse Gas Emissions compared to diesel fuel
    • FOREIGN FUEL INDEPENDENCE: 98% of fuel supplied from the U.S. and Canada
    • QUIET: 10 decibels more quiet than a diesel truck

    LABRIE CNG SIMPLE, RELIABLE AND PRODUCTIVE

    • Behind the cab design built to hold 4 or 5 CNG tanks, 66 or 81 DGE
    • Low height, integrated body shape, roof mounted design. 4 or 5 tanks, 60 to 75 DGE
    • Premium design having low impact on legal payload

     

    CNG Ready Trucks



     

     

     

     

     

  •  
    D

    Brochure & Media

    2R-II & 2R-III

     

    For more information on the Leach 2R-II and 2R-III

     

     

    Adobe PDF Download our Product Brochure
    Youtube Visit our Youtube Channel
  •  
    E

    Dealers & Demos

    Call us for more info

     

    Dealers in the US

    Distributors in the US


    In Canada

    Distributors in Canada


    International

    International Distributor;

    General Sales & Demos

    Sales
    Sales - Phone 1-800-463-6638
    Sales - Phone 1-418-831-8250
    Sales - Fax 1-418-831-5255
    Sales - Email Contact our Regional Sales Managers to get a quote on a Labrie Enviroquip Truck or help you locate a Distributor near you. 

    Demo Program
    Sales - Phone 1-920.232.7510
    Demos - Email Contact us for more information on our Demos
       
     

Menu.

Home

Our Trucks

If Your Route Is

Our Certified Dealers

Parts & Service

About Labrie

Contact Us

Latest News

Find a Sales Rep

Click to find and contact one of our Sales Representatives.   Find a Sales Rep

Request a Quote

If you wish to request a quote to get pricing on a Labrie, Leach or Wittke truck, please use our Online Quote Request form   Request a Quote

Request Information

Thank you for your interest in Labrie Enviroquip Group Products. For more information, you may complete our Request Information Form.   Request information